Hustler Super 104 Zero Turn Mower

SKU: 940544EX Category: Brand:
This item cannot be purchased online.


The Super 104 is an affordable wide area mower with the manoeuvrability of a zero turn. Features include premium Kawasaki engine, 104″ cutting width, Hyper Drive System, Grammer premium suspension seat (standard), simple, service friendly design, and hydraulic wing deck lift. The Super 104 can mow up to 84 acres in 8 hours at 17km/h and will mow where most wide area mowers cannot.

<.>ROPS Folding, supplied with unit

<.>Grammer Premium Suspension Seat with operator isolation

<.>HyperDrive Hydro System industrial grade pumps and motors

<.>SmoothTrak steering responsive precise control

<.>Kawasaki FX1000V premium commercial duty engine

<.>0 17.7 kph (11 mph) top speed get the job done fast

<.>Hydraulic wing deck lift

<.>Remote air cleaner

<.>104″ Rear discharge deck Wide area cut

<.>45.4 L (12 US gal) fuel capacity

<.>26″ Drive and 15″ pneumatic caster tyres

<.>Fan forced hydro oil cooler

<.>Commercial duty, sealed deck spindles

<.>Simple design

Engine: Kawasaki FX1000V.

HP: 35.0 hp (26.1kW) @ 3600 RPM engine speed.

Type: Air cooled, 90 degree V twin, normally aspirated petrol engine.

Starter: 12 volt (see engine manufacturers specifications).

Ignition: Electronic.

Charging System: 12 volt (see engine manufacturers specifications).

Oil Filter: Spin on engine oil filter / Total oil capacity 2.0 U.S. qt. (1.9 litre) w/filter.

Fuel: Unleaded fuel (see engine manufacturer’s specifications).

Fuel Capacity: 45.4 L (12 US gal).

Fuel Filter: Replaceable, automotive type.

Air Filter: Heavy duty, canister style air cleaner to extend the service interval for

excessive, dirty applications and improved performance.

Cooling: Air cooled. Flywheel fan.

Governor: Mechanical.

PTO Clutch: 250 ft lbs.

Drive System: Dual hydrostatic. Individual pumps power two direct drive wheel motors. Hydrostatic

system operates on 15W50 Mobil 1 synthetic motor oil. Transmission drive (oil) cooler for increased system life.

Pumps: Two variable displacement, slipper piston pumps. Each pump powers one drive wheel.

Sauer Danfoss DDC 20.

Pump Drive: B Section V belt drive from engine crankshaft. Large pulley and idler diameters for longer belt life.

Hydraulic Lines: Stainless steel, high pressure lines with Parker Seal Lok O Ring face seal


Drive Cooling: Large capacity cooler with 9″ (228.6 mm) fan for extended hydraulic life.

Drive Filter: Internal.

Final Drive: Direct drive high torque wheel motors. One for each drive wheel. Parker TG0360 with

hot oil shuttle.

Ground Speed Forward: Infinitely variable 0 17.7 kph (0 11 mph).

Ground Speed Reverse: 0 12.07 kph (0 7.5 mph).

Steering: SmoothTrak twin lever steering provides independent control of each drive wheel.

Speed, forward, reverse, brake, and turns are all controlled with hand operated controls.

Turning Radius: True zero turning radius. Turns within its own length. Counter rotating,

independent drive wheels.

Brakes: In Service: Hydrostatic dynamic braking. Parking: Automotive style drum brakes.

When steering levers are placed in park position, integral park brakes are automatically engaged.

Caster Tyres: 15 x 6.0 6, rib tread

Tyres Drive: 26 x 12 12, turf tread

Hydraulic Capacity: Oil 11.36 L (3 US gal)

Weight: 1065.9 kg (2350 lbs)

Safety Features: Standard foldable ROPS with seat belt. Operator presence system connected to seat,

deck clutch and park brake switches. Stabiliser wheels at rear of lawn mower. Discharge chute deflector.

Seat: Grammer suspension seat with isolator platform.

Construction: Mainframe is 1.5″ x 3.0″ x .187″ (38 mm x 76.2 mm x 4.7 mm) rectangular steel

tubing with internal gusset in frame bend. Drive motors mounted to 7 ga (4.5 mm) welded steel. Front caster wheels mounted with ball bearings on each wheel. Front caster forks are .5″ (12.7 mm) steel.

Hour Meter: Standard.

ROPS: Standard foldable ROPS with seatbelt.

Seat Suspension: Standard.

Controls: Hand operated choke, throttle, ignition switch, electric mower clutch, Integrated

parking brakes.

Cup Holder: Cup holder moulded into the left side fuel tank. Accommodates nearly any cup size.

Indicators: Hour meter, engine warning light.

Height: 54.00″ (1370 mm) With ROPS folded down / 71.5″ (1816 mm) With ROPS up.

Width: With wings down: 106.1″ (2695 mm) With wings up at gauge wheels: 80.0″ (2032 mm)

With wings up at deck base: 72.5″ (1842 mm).

Width (tyre to tyre): 60.3″ (1532 mm).

Deck System: Rear Discharge: 104″ cut deck. Free floating deck using five blades. Centre deck is

suspended at the corners, houses three blades and includes five deck mounted adjustable anti scalp rollers. Two wing decks house one blade each and are attached to the centre deck with pivoting mounts. Outside of wings are suspended with adjustable casters and have one adjustable anti scalp wheel each.

Cutting Widths: 104″ Rear Discharge.

Deck Lift: Hydraulic powered deck and wing lift. Raise and lower deck from driver’s seat with

simple foot operated deck height switch. Pin for setting height, transport position. Change cutting heights, climb curbs and trailer more easily. Raise and lower deck wings with a hand operated switch on the instrument panel.

Deck Construction: Welded steel. Solid 1.5″ x .375″ (38 mm x 9.5 mm) steel bars reinforce impact areas

on trim edges. Gusset style box section reinforces front edges. Reinforcements welded onto spindle mount areas.

Cutting Height(s): Foot operated deck height adjustment. Pin for setting height, detent for transport

position. Height adjustment in .25″ increments from 1.0″ to 5.5″ (25.4 mm to 139.7 mm, 6 mm increments)

Blade(s): (5) Heavy duty, heat treated, low lift steel Fusion blades 1 x 23.86″ x 2.50″ x

.203″ CW cut 1 x 23.86″ x 2.50″ x .203″ CCW cut 1 x 20.50″ x 2.50″ x .203″ CW cut 2 x 20.50″ x 2.50″ x .203″ CW cut

Blade Tip Speed: 15,800 fpm

Blade Drive: Belt drive from engine with electric clutch to centre deck spindle. Belt drive from

centre deck outer spindles to each wing. Spring tension idler and large pulleys to extend belt life.

Spindles: Ductile iron casting with steel shafts and sealed ball bearings.

Width of Cut: 103.75″ (2635 mm).

Trim Capacity: 22.0″ 558.8 mm) [left side] 22.0″ 558.8 mm) [right side].

Optional accessories available for purchase separately include: Mulch Kits 104″: HA117257 includes wavy mulch blades. Kit Light: HA110153 Steering Lever Extension Kit: HA353961 Steering levers can be adjusted in several ways to make your mowing experience as comfortable as possible. Flasher Kit: HA110469 Beacon Kit: HA110467 Gator Mulcher Blades Centre Deck Use: HP601928 x 1 & HP794230 x 2 Gator Mulcher Blades Left Deck Use: HP601929 x 1 Gator Mulcher Blades Right Deck Use: HP794867 x 1 Replacement Blades: Center Deck Right & Center (2) (Fusion): HP600901 (Production) Center Deck Left (Fusion): HP795633 (Production) Left Wing Counter Clockwise (Fusion): HP796508 (Production) Right Wing Clockwise (Fusion): HP796839 (Production) Center Deck Wavy Mulch Left: HP604163 Center Deck Wavy Mulch Right (2): HP794214 Left Wing Wavy Mulch: HP604164 Right Wing Wavy Mulch: HP793398 Gator Center Deck Left: HP601928 Gator Center Deck Right (2): HP794230 Gator Right Wing: HP601929 Gator Left Wing: HP794867

Please Note: Specifications subject to change without notice.