Hustler X One 54″ Zero Turn Mower
We designed the X ONE mainframe with heavy gauge rectangular tubing for strength. Then we narrowed the body, allowing the X ONE to carry three different deck sizes to meet any user’s needs. With a top speed of 17 kph, the X ONE makes quick work of the largest jobs. With VX4 deck technology and SmoothTrak Steering, you get an ultra clean cut and the famous Hustler feel, unparalleled in the zero turn industry. With the perfect combination of power and versatility, the X ONE can do it all.
<.>ROPS Folding, supplied with unit
<.>Full suspension seat as standard
<.>54″ Cut side discharge deep decks with VX4 technology
<.>Fabricated one piece chassis
<.>Kawasaki V Twin FX850V engine
<.>Remote heavy duty canister air cleaner
<.>44.2 L (11.7 US gal) fuel capacity
<.>Parker unitized 12cc/rev pump & 15.9 ci/rev Wheel motors
<.>Transmission mounted fans
<.>24″ Drive and 13″ caster tyres
<.>0 17 kph (0 10.5 mph) to get the job done fast
<.>SmoothTrak steering with patented automatic park brake system
<.>Very high blade tip speed for beautiful cut 18,340 fpm
<.>Commercial duty, sealed deck spindles
<.>Standard hour meter
Engine: Kawasaki FX850V
HP: 27.0 hp (20.1 kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995
Type: Air cooled, 90 degree V twin, normally aspirated petrol engine.
Starter: 12 volt (see engine manufacturers specifications)
Charging System: 12 volt (see engine manufacturers specifications for current rating)
Oil Filter: Spin on engine oil filter / Total oil capacity 2.1 U.S. qt. (2.0 litre) w/filter
Fuel: Unleaded fuel (see engine manufacturers specifications)
Fuel Capacity: 44.2 L (11.7 US gal)
Fuel Filter: Replaceable, automotive type
Air Filter: Heavy duty, dual stage canister style air cleaner to extend the service interval
for excessive, dirty applications and improved performance.
Cooling: Air cooled. Fly wheel fan
Drive System: Dual hydrostatic. Parker unitized 12cc/rev Pumps & 15.9ci/rev Wheel motors.
Pump Drive: V belt drive from engine crankshaft
Hydraulic Lines: Stainless steel, high pressure lines with Parker Seal Lok O Ring face seal
Drive Cooling: Transmission mounted fans.
Drive Filter: Internal
Ground Speed Forward: Infinitely variable 0 17 kph (0 ™ 10.5 mph)
Ground Speed Reverse: 0 8 kph (0 5 mph)
Steering: SmoothTrak twin lever steering provides independent control of each drive wheel.
Speed, forward, reverse, brake, and turns are all controlled with hand operated controls.
Turning Radius: True zero turning radius. Turns within its own length. Counter rotating,
independent drive wheels
Brakes: In Service: Hydrostatic dynamic braking. Parking: Automotive style drum brakes.
When steering levers are placed in park position, integral park brakes are automatically engaged.
Caster Tyres: 13 x 6.5 6
Tyres Drive: 24 x 9.5 12, turf tread
Weight: 573 kg (1265 lbs)
Safety Features: Standard foldable ROPS with seat belt. Operator presence system connected to seat,
deck clutch and park brake switches. Stabiliser wheels at rear of lawn mower. Discharge chute deflector.
Seat: Premium moulded vinyl full suspension seat with armrests. Fore and aft sliding
Construction: Mainframe is 1.5″ x 2.0″ x .188″ (38 mm x 50.8 mm x 4.7 mm) rectangular steel
tubing. Front caster wheels mounted with sealed ball bearings on each wheel. Front caster forks are fabricated 1/2″ (12.7 mm) steel.
Hour Meter: Standard
ROPS: Certified, 2 post, foldable ROPS
Controls: Hand operated choke, throttle, ignition switch, electric mower clutch, Integrated
Cup Holder: Cup holder moulded into the left side fuel tank.
Height: 49″ (1244.6 mm) With ROPS folded / 71.25″ (1724.7 mm) With ROPS up.
Overall Length: 82.75″ (2101.85 mm)
Width: 59.25″ (1504.9 mm) w/discharge chute up.
Width (tyre to tyre): 51″ (1295.4 mm)
Deck System: Side Discharge: 54″ cut VX4. Free floating deck using three blades with centre
blade to the front. Includes 3 deck mounted rollers to improve flotation in rolling and uneven terrain.
Cutting Widths: 54″ cut Side Discharge
Deck Lift: Raise and lower deck from the driver’s seat with a simple foot operated deck height
adjustment. Pin for setting height, transport position. Change cutting heights, climbing curbs and trailer more easily.
Deck Construction: Welded steel 11 ga. + 7 ga. (3mm x 4.6mm). 11 ga. Formed channel with rolled impact
areas on trim edges. Commercial style box section reinforced front edge. Reinforcements 10 ga.+ 7 ga. doubler (3mm x 4.6 mm) steel welded onto spindle mount areas. High density, rubberised discharge chute.
Cutting Height(s): Foot operated deck height adjustment. Pin for setting height, detent for transport
position. Height adjustment in .25″ increments from 1.0″ to 5.5″ (25.4 mm to 139.7 mm, .6 cm increments).
Blade(s): (3) Heavy duty, blades 18.5″ x 2.5″ x .20″
Blade Tip Speed: 18,340 fpm
Blade Drive: Single V belt drive from engine with electric clutch to all three spindles. Spring
tension idler and large pulleys to extend belt life.
Spindles: Ductile iron casting with steel shafts and sealed ball bearings.
Discharge Chute: High density, rubberised.
Optional accessories available for purchase separately include: Mulch Kit 54″: HA124311 includes wavy mulch blades. The versatile Hustler mowing decks can side discharge or mulch. Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces handling of clippings, improves appearance, and recycles nutrients back to the soil. Grass Catcher 48″ / 54″ / 60″: HA935783 3 bag catcher [*must order (1) adapter kit below to complete 935783]. Easy on, easy off hopper assemblies. Catcher Adapter Kit 54″: HA123778 Kit Light: 48″ / 54″ / 60″: HA123549 Steering Lever Extension Kit: HA122760 Steering levers can be adjusted in several ways to make your mowing experience as comfortable as possible. Flex Forks: HA606696 [2 forks] Rear Anti Scalp (single) 48″ / 54″ / 60″: HA113910 Semi Pneumatic tyre 13 x 6.5 6: HA789537 Replacement Blades: Low Lift: HP601124 (Production) Low Lift (Fusion): HP601012 High Lift: HP606251 High Lift (Fusion): HP797696 Wavy Mulch: HP797704 Gator: HP797712
Please Note: Specifications subject to change without notice.